Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor

Product Categories

Forsentek Co., Limited

Contact Now

Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor

Name: Low Profile Compression Force Transducer 3kN 15kN 750N 300N Thin Weight Sensor
Brand: Forsentek
Price: 1 USD

Brand Name : Forsentek

Model Number : FHA

Certification : CE

Place of Origin : China

MOQ : 4pcs

Payment Terms : T/T,Western Union or Paypal

Supply Ability : 17700pcs/month

Delivery Time : 1-8 weeks

Packaging Details : Carton

Usage : Weight measurement

Type : Low profile load cell

Output : Analog Sensor

Load direction : Compression

Capacity : 3kN 1.5kN 750N 300N

Material : Aluminum

Contact Now

Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor

Low Height Compression Force Sensor FHA is produced based on strain gauge technology with CE certification. Low profile compression load cell FHA offers 0-300N / 0-750N / 0-1500N / 0-3000N four measuring ranges to choose form, high accuracy with 0.05% non-linearity of the full capacity. Planar Beam Load Cell FHA utilizes 1000ohms gauges which has better performance compared to commonly used 350ohms gauges in terms of power consumption and long term stability. Compact design enables the construction of scales with an extremely low overall height, Thin load cell FHA is also suitable for battery powered weighing devices.
Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor
Dimensions(in milimeter)

Specifications

Capacity	30kg / 300N / 66lb 75kg / 750N / 165lb 150kg / 1500N / 330lb 300kg / 3000N / 660lb
Rated output	1.5/2.0 mV/V
Excitation	3-10V
Zero balance	±0.1mV/V
Nonlinearity	±0.05% R.O.
Hysteresis	±0.05% R.O.
Nonrepeatability	±0.05% R.O.
Creep(3min)	±0.05% R.O.
Safe overload	150% F.S.
Ultimate overload	200% F.S.
Operating temperature	-10...+40^oC
Temperature shift zero	±0.2% R.O./^oC
Temperature shift span	±0.05% R.O./10^oC
Input resistance	1120±50 ohms
Output resistance	1000±10 ohms
Insulation resistance	>2000M ohms
Ingress protection	IP65
Material of element	Aluminum alloy
Cable	30kg/75kg — 32AWG 400mm 4-wire 150kg/300kg — 32AWG 150mm 4-wire
Wiring code	Red--E+ Black--E- Green--S+ White--S-

A load cell is a transducer that converts mechanical load into mV signal proportional to the applied load.The acting force causes deformation of the measuring element,the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer) when rated load is applied, expressed in terms of mV/V. The rated output indicates the output signal range of the sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within 0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: Planar beam load cell FHA-30kg with 1.5mV/V rated output powered by 10V DC ,the output range is 0~15mV.
Example two: Low profile compression load sensor FHA-300kg with 2mV/V rated output powered by 3.3V DC ,the output range is 0~6.6mV.
Low Profile Compression Force Sensor 3000N 1500N 750N 300N Thin Load Transducer

Click here to download datasheet

Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Forsentek Co., Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!